Share:

Milk Stout: Smooth, Sweet 20-Litre Homebrew Recipe

A classic English-style milk stout at about 5% ABV: smooth and gently sweet, with milk chocolate and coffee notes from lactose and chocolate malt. 20-litre all-grain recipe with extract option.

Milk Stout / Sweet Stout · 5.0% ABV · 25 IBU · 20 Litres · 10-14 days at 17-19°C, then 2-4 weeks conditioning · beginner

Brewing figures

Original gravity
1.060
Final gravity
1.022

Milk stout, also called sweet stout or cream stout, is the soft, comforting side of the stout family. Where a dry Irish stout finishes roasty and sharp, a milk stout is smooth, rounded and gently sweet, with flavours of milk chocolate, coffee with cream and a little caramel. The secret is lactose, the natural sugar found in milk. Ordinary brewing yeast cannot ferment it, so it stays in the finished beer, adding body and a mild sweetness without making it sticky. This 20-litre recipe brews a classic English-style milk stout of around 5% ABV that is easy to drink and very forgiving to make.

What Makes a Milk Stout Different?

  • Lactose: the defining ingredient. Because ale yeast can’t break it down, lactose leaves residual sweetness and a creamy, fuller body. Despite the name, there is no actual milk in the beer, but it is not suitable for vegans or anyone with a lactose intolerance or milk allergy.

  • Low bitterness: hops are kept in the background so the sweetness and chocolate malt can shine.

  • Soft roast: chocolate malt does most of the work, with just enough roasted barley for a coffee-like edge.

  • Moderate strength: traditional English sweet stouts are often quite low in alcohol. Ours sits at about 5%, a touch stronger for a richer pint.

  • A little history: sweet stouts were very popular in Britain in the early twentieth century, when they were marketed as nourishing. Brewers can no longer make health claims, and British rules have long restricted the word “milk” on labels, which is why many are sold as “sweet stout” or “cream stout” instead.

Recipe Overview

  • Batch size: 20 litres

  • Original gravity: 1.060

  • Final gravity: about 1.022 (the lactose keeps it high)

  • ABV: about 5.0%

  • Bitterness: around 25 IBU

  • Colour: near black, with a tan head

  • Efficiency assumed: 72% all-grain

Ingredients

  • 3.5 kg Maris Otter pale malt

  • 300 g crystal malt 60L

  • 250 g chocolate malt

  • 200 g roasted barley

  • 200 g flaked oats

  • 100 g black malt

  • 450 g lactose (milk sugar) @ 10 min

  • 40 g East Kent Goldings @ 60 min

  • Half a Protofloc or Whirlfloc tablet @ 15 min

  • Yeast nutrient @ 10 min

  • English ale yeast, e.g. Lallemand Nottingham, Fermentis S-04 or Wyeast 1968 London ESB

  • Extract option: replace the Maris Otter with 2.8 kg light dried malt extract and steep the speciality grains at 65°C for 30 minutes

Method

1. Mash

Heat about 17 litres of water to 72°C and stir in the crushed grains (everything except the lactose) to hit a mash temperature of around 67°C. A slightly higher mash than usual leaves more unfermentable sugars and an even fuller body. Hold for 60 minutes, stirring once or twice.

2. Sparge

Rinse the grain bed slowly with water at about 76°C until you have collected around 25 litres of wort in the kettle. Dark grains can make the wort look like cola, which is exactly what you want.

3. Boil

Bring to a rolling boil and add the East Kent Goldings at the start for a 60-minute boil. With 15 minutes to go, add the Protofloc or Whirlfloc. With 10 minutes to go, add the yeast nutrient and the lactose. Dissolve the lactose in a jug of hot wort first, then stir it back in so it doesn’t sink and scorch on the bottom of the kettle.

4. Chill and Pitch

Chill the wort as quickly as you can to 18°C, transfer it to a clean, sanitised fermenter and take a gravity reading. Aerate well by splashing or shaking, then pitch your yeast. For dried yeast, one 11 g sachet is enough, or rehydrate it first if the packet recommends it.

5. Ferment

Ferment at 17–19°C for 10–14 days, until the gravity is stable for three days in a row at around 1.020–1.024. Don’t worry that it finishes higher than most beers: that is the lactose doing its job, not a stuck fermentation.

6. Package

Bottle or keg once fermentation is complete. Prime for a fairly low carbonation, about 1.8–2.0 volumes of CO2, which suits the soft, creamy character. Leave bottles somewhere warm for two weeks, then let them condition in a cool place for another couple of weeks. Milk stout is ready to drink sooner than big stouts, but it rounds out nicely after a month.

Tips for a Great Milk Stout

  • Get the sweetness right: 450 g of lactose gives a noticeable but balanced sweetness. Use 300 g for a drier beer or up to 600 g for a dessert-like pint.

  • Keep it smooth: the flaked oats add a silky mouthfeel. Don’t overdo the black malt or roasted barley or it can taste harsh.

  • Watch your sanitation: sweet, dark beers hide flaws less than you might think, so clean and sanitise everything thoroughly.

  • Label it clearly: always tell people a milk stout contains lactose, so anyone avoiding dairy knows to skip it.

Variations

  • Coffee milk stout: add 100 g of coarsely ground coffee beans to the fermenter for the last two to three days.

  • Vanilla: soak a split vanilla pod in a little vodka for a week, then add both to the fermenter before packaging.

  • Chocolate: add 100 g of cocoa nibs for the final few days of fermentation for a richer chocolate flavour.

  • Oatmeal stout instead: for something drier and roastier without lactose, try our oatmeal stout recipe.

Serving and Food Pairing

Serve milk stout at around 10–12°C in a nonic pint glass or a tulip, so the chocolate and coffee aromas can come through. It is wonderful with desserts: chocolate brownies, sticky toffee pudding or vanilla ice cream (pour a little over the top for a beer float). It also works with rich, salty food such as smoked cheese or a beef and ale pie. Not sure how it fits into the family? Our guide to stout vs porter explains the difference.

Please brew and drink responsibly, and remember that homebrew for your own use should never be sold without the proper licences.